XEAST is a Leading Supplier & Manufacturer of Professional Testing and Measuring Instruments in China.
XEAST is a leading supplier of thermal imager, laser level & digital oscilloscope in China. XEAST, your testing partner!
Product Introduction
DSO4004C Series 4CH oscilloscope, with 1CH Arbitary/function waveform generator, independent keys of oscilloscope and waveform generator which is easy to operate at the same time.. 80-250MHz bandwidth, minimum measurement range 500μV /div,1GS/s sample rate,advanced digital trigger system, high trigger sensitivity, low trigger jitter,high resolution 7 inch 64K color TFT (800*480).
Product Features
Product Display
Key Specifications
Model |
DSO4254C |
DSO4204C |
DSO4104C |
DSO4084C |
Bandwidth |
250MHz |
200MHz |
100MHz |
80MHz |
Horizontal |
||||
Sample Rate Range |
1GS/s |
|||
Waveform Interpolation |
(sin x)/x |
|||
Record Length |
Maximum 64K samples per single-channel; |
|||
Maximum 32K samples per dual-channel (4K, 32K optional) |
||||
SEC/DIV Range |
2ns/div~100s/div |
|||
1, 2, 5 sequence |
||||
Sample Rate and |
±50ppm |
|||
Delta Time Measurement Accuracy |
Single-shot, Normal mode ± (1 sample interval +100ppm × reading + 0.6ns) |
|||
>16 averages ± (1 sample interval + 100ppm × reading + 0.4ns) |
||||
Sample interval = s/div ÷ 200 |
||||
Vertical |
||||
AD Converter |
8-bit resolution, each channel sampled simultaneously |
|||
VOLTS/DIV Range |
500μV/div to 10V/div at input BNC |
|||
Position Range |
500μV/div~20mV/div, ±400mV |
|||
50mV/div~200mV/div, ±2V |
||||
500mV/div~2V/div, ±40V |
||||
5V/div~10V/div, ±50V |
||||
Selectable Analog Bandwidth Limit, typical |
20MHz |
|||
Low Frequency Response (-3db) |
≤10Hz at BNC |
|||
Rise Time at BNC, typical |
DSO4254C |
DSO4204C |
DSO4104C |
DSO4084C |
<1.4ns |
≤1.8ns |
<3.5ns |
≤4.4ns |
|
DC Gain Accuracy |
±3% for Normal or Average acquisition mode, 10V/div to 10mV/div |
|||
±4% for Normal or Average acquisition mode, 5mV/div to 500μV/div |
||||
|
Note: Bandwidth reduced to 6MHz when using a 1X probe. |
|||
Acquisition |
||||
Acquisition Modes |
Normal, Peak Detect, Average and HR |
|||
Acquisition Rate, typical |
Up to 2000 waveforms per second per channel (Normal acquisition mode, no measurement) |
|||
Single Sequence |
Acquisition Mode |
Acquisition Stop Time |
||
|
Normal, Peak Detect |
Upon single acquisition on all channels simultaneously |
||
|
Average |
After N acquisitions on all channels simultaneously, N can be set to 4, 8, 16, 32, 64 or 128 |
||
Trigger |
||||
Mode |
Auto, Normal |
|||
Level |
CH1~CH4 |
±4 divisions from center of screen |
||
EXT |
0~3.3V |
|||
Holdoff Range |
20ns ~ 10s |
|||
Trigger Level Accuracy |
CH1~CH4 |
0.2div × volts/div within ±4 divisions from center of screen |
||
EXT |
± (6% of setting + 40mV) |
|||
Edge Trigger |
||||
Slope |
Rising, Falling, Rising&Falling |
|||
Source |
CH1~CH4/EXT |
|||
Pulse Width |
||||
Polarity |
Positive, Negative |
|||
Condition(When) |
<, >, ≠, = |
|||
Source |
CH1~CH4 |
|||
Width Range |
8ns ~ 10s |
|||
Resolution |
8ns |
|||
Video Trigger |
||||
Signal Standard |
NTSC, PAL |
|||
Source |
CH1~CH4 |
|||
Sync |
ScanLine, LinrNum, OddField, EvenField and AllField |
|||
Slope Trigger |
||||
Slope |
Rising, Falling |
|||
Condition(When) |
<, >, ≠, = |
|||
Source |
CH1 ~ CH4 |
|||
Time Range |
8ns ~ 10s |
|||
Resolution |
8ns |
|||
Overtime Trigger |
||||
Source |
CH1~CH4 |
|||
Polarity |
Positive, Negative |
|||
Time Range |
8ns ~ 10s |
|||
Resolution |
8ns |
|||
Window Trigger |
||||
Source |
CH1~CH4 |
|||
Pattern Trigger |
||||
Pattern |
0: Lower level; 1: High level; |
|||
Level |
CH1~CH4 |
|||
Interval Trigger |
||||
Slope |
Rising, Falling |
|||
Condition(When) |
<, >, ≠, = |
|||
Source |
CH1~CH4 |
|||
Time Range |
8ns ~ 10s |
|||
Resolution |
8ns |
|||
Under Amp |
||||
Polarity |
Positive, Negative |
|||
Condition(When) |
<, >, ≠, = |
|||
Source |
CH1~CH4 |
|||
Time Range |
8ns ~ 10s |
|||
Resolution |
8ns |
|||
UART Trigger |
||||
Condition(When) |
Start, Stop, Data, Parity Error, COM Error |
|||
Source(RX/TX) |
CH1~CH4 |
|||
Data format |
Hex |
|||
Condition(When) |
<, >, ≠, = |
|||
Data Length |
1 byte |
|||
Data Length |
5 bit, 6 bit, 7 bit, 8 bit |
|||
Parity Check |
None, Odd, Even |
|||
Idle Level |
High, Low |
|||
Baud Rate(Selectable) |
110/300/600/1200/2400/4800/9600/14400/19200/38400/57600/115200/230400/380400/460400 bit/s |
|||
Baud Rate (Custom) |
300bit/s~334000bit/s |
|||
LIN Trigger |
||||
Condition(When) |
Interval Field, Sync Field, Id field, Sync Id Error, Identifier, Id and Data |
|||
Source |
CH1~CH4 |
|||
Data format |
Hex |
|||
Baud Rate (Selectable) |
110/300/600/1200/2400/4800/9600/14400/19200/38400/57600/115200/230400/380400/460400 bit/s |
|||
Baud Rate (Custom) |
300bit/s~334000bit/s |
|||
CAN Trigger |
||||
Condition(When) |
Start Bit, Remote Frame, Data Frame Id, Frame Id, DataFrame Id A, Error Frame, All Error, Ack Error, Overload Fram |
|||
Source |
CH1~CH4 |
|||
Data format |
Hex |
|||
Baud Rate (Selectable) |
10000, 20000, 33300, 500000, 62500, 83300, 100000, 125000, 250000, 500000, 800000, 1000000 |
|||
Baud Rate (Custom) |
5kbit/s~1Mbit/s |
|||
SPI Trigger |
||||
Source (CS/CLK/Data) |
CH1~CH4 |
|||
Data format |
Hex |
|||
Data Length |
4, 8, 16, 24, 32 |
|||
IIC Trigger |
||||
Source (SDA/SCL) |
CH1~CH4 |
|||
Data format |
Hex |
|||
Data Index |
0~7 |
|||
When(Condition) |
Start, Stop, No Ack, Address, Data, Restart |
|||
Inputs |
||||
Input Coupling |
DC,AC or GND |
|||
Input Impedance, DC coupled |
20pF±3 pF,1MΩ±2% |
|||
Probe Attenuation |
1X,10X |
|||
Supported Probe Attenuation Factors |
1X, 10X, 100X, 1000X |
|||
Overvoltage Category |
300V CAT II |
|||
Maximum Input Voltage |
300VRMS (10X) |
|||
Measurements |
||||
Cursors |
Voltage difference between cursors: △V |
|||
Automatic Measurements |
Frequency, Period, Average, Pk-Pk, RMS, PeriodRms, Min, Max, RiseTime, FallTime, + Width, - Width, + Duty, - Duty, Vbase, Vtop, Vmid, Vamp, Overshoot, Preshoot, PeriodAvg, FOVShoot, RPREShoot, BWidth, FRR, FFF, FRF, FFR, LRR, LRF, LFR and LFF |
|||
General Specifications |
||||
Display |
||||
Display Type |
7 inch 64K color TFT (diagonal liquid crystal) |
|||
Display Resolution |
800 horizontal by 480 vertical pixels |
|||
Display Contrast |
Adjustable |
|||
Probe Compensator Output |
||||
Output Voltage, typical |
About 2Vpp into ≥1MΩ load |
|||
Frequency, typical |
1kHz |
|||
Power Supply |
||||
Supply Voltage |
100-120VACRMS(±10%),45Hz to 440Hz,CATⅡ |
|||
Power Consumption |
<30W |
|||
Fuse |
T,3.15A,250V,5x20mm |
|||
Environmental |
||||
Operating Temperature |
0~50 °C (32~122 °F) |
|||
Storage Temperature |
-40~+71 °C (-40~159.8 °F) |
|||
Humidity |
≤+104℉(≤+40°C): ≤90% relative humidity |
|||
106℉~122℉ (+41°C ~50°C): ≤60% relative humidity |
||||
Cooling Method |
Convection |
|||
Altitude |
Operating and Nonoperating |
3,000m(10,000 feet) |
||
|
Random Vibration |
0.31gRMS from 50Hz to 500Hz, |
||
10 minutes on each axis |
||||
|
Nonoperating |
2.46gRMS from 5Hz to 500Hz |
||
10 minutes on each axis |
||||
Mechanical Shock |
Operating |
50g, 11ms, half sine |
||
Mechanical |
||||
Dimension |
318 x 110 x 150mm(L x W x H) |
|||
Weight |
2900g |
Arbitrary Waveform Generator Mode |
|
Waveform Frequency |
Sine: 0.1Hz~25MHz |
Amplitude |
5mV~3.5Vp-p(50Ω) |
DAC |
2K~200MHz adjustable |
Frequency Resolution |
0.001 |
Channel |
1CH waveform output |
Waveform Depth |
4KSa |
Vertical Resolution |
12 bit |
Frequency Stability |
<30ppm |
Output Impedance |
50 Ω |
Just leave your email or phone number on the contact form so we can provide you with more services!
Just leave your email or phone number on the contact form so we can provide you with more services!